Guangzhou Pangsheng Electronic Technology Co

The automatic reclosing leakage protector detects the line voltage before closing. When the power supply voltage is abnormal or overvoltage, it will block the closing and alarm. If the fault is not eliminated, it cannot be closed and energized. When the fault is eliminated, the switch will automatically close and energize. Product functions:
>Short circuit protection:
> When the current of the automatic reclosing leakage protector is greater than twice the rated current, the automatic reclosing leakage protector will disconnect within seconds to ensure the safety of the equipment.
>
>Leakage protection:
>When a leakage occurs in the line, the automatic reclosing leakage protector will open within seconds. (Leakage non-operating current:, Leakage operating current:.)
>
>Overcurrent/load protection:
>When the current is greater than times the rated current, the automatic reclosing leakage protector will If the duration and size exceeds seconds, or the period is greater than times the rated current, the automatic reclosing leakage protection switch will be disconnected to implement protection.
>
>Overvoltage protection:
>When the power supply voltage is higher than the automatic reclosing leakage protection switch, the automatic reclosing leakage protection switch will be turned off. After the voltage drops back to normal, the automatic reclosing leakage protector automatically closes and energizes.
>
>Under-voltage protection:
>When the supply voltage is lower than the automatic reclosing leakage protector, it will disconnect. After the voltage recovers to normal, the automatic reclosing leakage protector automatically closes and the power-on operation is normal.
>
>Pre-closing detection:
>
>Auto-reclosing characteristics: (adjustable)
>Instant leakage or instantaneous impact on the line (such as lightning socket When there may be danger due to fire, etc., the automatic reclosing leakage protector will disconnect immediately. After the fault, if the line is safe, the automatic reclosing leakage protector will automatically reclose and energize. The number of closing times is unlimited
>
>Manual switching performance:
>When the test button is pressed manually for leakage, the neutral line and the live line are disconnected accordingly, and there is no output. Automatically closes after seconds, and the automatic reclosing protector is in normal working condition.
>After manually turning off the power switch, the two relays are disconnected at the same time and there is no output. The on-off action time is less than seconds. Restart the switching power supply and output both channels at the same time.



< r/ />